A rod holder remains one of the most important fishing gears in outfitting a boat for angling. The decision on what rod holder to use might all come down to the type of fishing and your boat.
For an aluminum boat, a clamp on rod holder is preferable especially if you hate the idea of drilling holes on your boat.
If you are a beginner, the need to cut cost might nudge you towards foregoing a rod holder. Consider this though; do you know how inconveniencing it is when you have to handle your bait and tackle while fishing? Where to place the fishing rod becomes a huge problem.
Again, a rod holder, whether clamp on or a different type, gives you the freedom to attend to other tasks that need immediate attention while you are on the water. Sometimes, you need a break from holding the rod; the rod holder then becomes important without having to actually stop fishing.
Getting the best out of Clamp-on Rod Holders for Aluminum Boats
The versatility of clamp on rod holders is one of the biggest things they have going for them. They attach to your alumni boat using a screw mechanism to a horizontal rail or a vertical stanchion. Where you attach them depends on the design of the boat and how easy it is to reach it while fishing.
Their versatility also means you have the option of positioning your rod holders in various parts of the boats like the bow pulpit, hard-top, radar arch or stern pushpit.
Though they might not as sturdy or strong like screwed down mounted holders, the best ones are able to tilt and rotate in different directions before locking in place.
This makes them ideal for spinning or baitcasting set-ups.
Clamp-on rod holder design: What to look for
Most new rod holders look shiny and capable of great things on the shelf. It is after putting them through their paces you’d know if you had made a great choice or not.
However, the following are excellent tips on choosing the best ones in the hardware store:
- Make sure the quality is sound
- The finishing should have no defects like welds
- Make sure the fasteners are of high quality
- The clamps must be strong to withstand the stress of trolling for a big dish
Stainless steel vs. plastic clamp on rod holder
At the point of purchasing a clamp on rod holder for your aluminum boat, the relative costs of the models might push you in the wrong direction.
The best clamp on holder is made of stainless steel. They could be costlier than, say, plastic, but in the long run, they are cheaper as they won’t need replacing anytime soon.
Also, they always look like new all the time and require just a bit of cleaning to get them up to speed. If you need to catch that big fish, you would appreciate the strength and durability of a stainless steel rod holder.
When you finally decide to make the purchase, make sure it is made from 316 stainless steel. These are more resistant to corrosion and pitting.
The Amarine-made Stainless Clamp-on fishing rod holder is a good example that completely fits the bill of what a rod holder for an aluminum boat should be.
The rubber insert in the holder is perfect as it protects your road from wear and tear.
If for one reason or the other you have to buy a plastic clamp on rod holder, you must be aware that plastic gets brittle after a few alternating summers and winters of hot sun and cold temperatures respectively.
In which case, a little stress could result in equipment failure. Breakage of a vital coronet of the rod holder is the most common.
However, you can get your money’s worth with the Eagle Claw AABRH Clamp on Aluminum Boat Rod Holder if your mind is set on using a plastic rod holder.
The high impact plastic they are made from ensures they are relatively strong and would withstand some level of stress or pressure while fishing.
That said, your first choice should always be a Clamp-on rod holder made of the best materials like stainless steel. That could be mean the difference between having a great day outdoors fishing or wasting time tracking back to the nearest shop to look for a replacement rod holder.